+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: Language Pack for v80 (/showthread.php?tid=4110)
Language Pack for v80 - jmpg - 07-14-2015 06:28 AM
Were can I get the Language Pack files for firmware version 80?
I've checked at http://support.yealink.com/documentFront/forwardToDocumentDetailPage?documentId=18 but did not found anything.
I would like to adjust some Portuguese translations in my SIP-T23G phones.
Regards,
José Gonçalves
RE: Language Pack for v80 - Yealink_Michael - 07-14-2015 04:29 PM
(07-14-2015 06:28 AM)jmpg Wrote: Were can I get the Language Pack files for firmware version 80?
I've checked at http://support.yealink.com/documentFront/forwardToDocumentDetailPage?documentId=18 but did not found anything.
I would like to adjust some Portuguese translations in my SIP-T23G phones.
Regards,
José Gonçalves
hi
lang file attached
RE: Language Pack for v80 - jmpg - 07-14-2015 04:45 PM
(07-14-2015 04:29 PM)Yealink_Michael Wrote: hi
lang file attached
Thank you!
Are these language files only for SIP-T23G or can also be used with all other IP phones from T2 series with a V80 software (T19P E2, T21P E2, T23P, T27P, T29G) ?
RE: Language Pack for v80 - Yealink_Michael - 07-14-2015 04:52 PM
(07-14-2015 04:45 PM)jmpg Wrote:(07-14-2015 04:29 PM)Yealink_Michael Wrote: hi
lang file attached
Thank you!
Are these language files only for SIP-T23G or can also be used with all other IP phones from T2 series with a V80 software (T19P E2, T21P E2, T23P, T27P, T29G) ?
it is common used
RE: Language Pack for v80 - welvaarts - 01-14-2016 05:28 PM
I have translated this language file in Dutch, and added it with autoprovision to my T21P E2 phone.
After that there is a Dutch Language added in the settings, but the text on the display is wrong. It looks like bad English.
Can I simply add a language, or have I to delete another one in the T21P E2 phone
RE: Language Pack for v80 - welvaarts - 01-14-2016 08:30 PM
Problem solved, Coding of language file was "ANSI" but this should be "UCS-2 Little Endian". After change coding with Notepad++ everything was fine.