(08-08-2017 06:18 PM)jemmerich Wrote:  Can anyone provide an example of how the y000000000000.boot and app.cfg need to be configured in order to deploy an application? I have confirmed that the GET is fetching both files, but they are not grabbing the APK from the phone system. I can download the file from a PC so it should be accessible. I was just not sure if i had made the config files properly.

(08-09-2017 07:12 AM)Aishion_Yealink Wrote:  

(08-08-2017 06:18 PM)jemmerich Wrote:  Can anyone provide an example of how the y000000000000.boot and app.cfg need to be configured in order to deploy an application? I have confirmed that the GET is fetching both files, but they are not grabbing the APK from the phone system. I can download the file from a PC so it should be accessible. I was just not sure if i had made the config files properly.

Dear,

About how to deploy app on T58V, please kindly download and refer to two files about install third-party app on T58V in below link:

http://download.support.yealink.com/download?path=upload%2Fattachment%2F2017-7-31%2F3%2F42728206-8529-4d57-b3eb-9722dccab413%2FInstalling%20the%20Applications%20on%20Yealink%20Smart%20Media%20​Phones%20V1.1.zip

(1) Deploy guide:
“Installing the Applications on Yealink Smart Media Phones V1.1.pdf”

(2) Disclaimer:
“Disclaimer_for_Unauthorized_Apps_on_Yealink_Android-based_Phone.pdf”

Please read disclaimer before you install the app.

And I attach a boot file and a cfg file you can find in below linkwhich I successfully download APP on my side as an example for you:

http://ftp.yealink.com/?ShareToken=F5D844D085A3116C7D0AA5FFB1C3F3E09FC7DB49

If any question, please feel free to contact us.

Best Regards
Aishion

(08-09-2017 02:10 PM)jemmerich Wrote:  

(08-09-2017 07:12 AM)Aishion_Yealink Wrote:  

(08-08-2017 06:18 PM)jemmerich Wrote:  Can anyone provide an example of how the y000000000000.boot and app.cfg need to be configured in order to deploy an application? I have confirmed that the GET is fetching both files, but they are not grabbing the APK from the phone system. I can download the file from a PC so it should be accessible. I was just not sure if i had made the config files properly.

Dear,

About how to deploy app on T58V, please kindly download and refer to two files about install third-party app on T58V in below link:

http://download.support.yealink.com/download?path=upload%2Fattachment%2F2017-7-31%2F3%2F42728206-8529-4d57-b3eb-9722dccab413%2FInstalling%20the%20Applications%20on%20Yealink%20Smart%20Media%20​Phones%20V1.1.zip

(1) Deploy guide:
“Installing the Applications on Yealink Smart Media Phones V1.1.pdf”

(2) Disclaimer:
“Disclaimer_for_Unauthorized_Apps_on_Yealink_Android-based_Phone.pdf”

Please read disclaimer before you install the app.

And I attach a boot file and a cfg file you can find in below linkwhich I successfully download APP on my side as an example for you:

http://ftp.yealink.com/?ShareToken=F5D844D085A3116C7D0AA5FFB1C3F3E09FC7DB49

If any question, please feel free to contact us.

Best Regards
Aishion

Thanks, this was very helpful. I had a few syntax errors that were preventing install. I got an app to install; I was wondering how I change the permissions of what the app is allowed to access on the system? I can see in the app settings what it is allowed to see, however it is apparently not getting all the permissions it requires. I wasnt sure if there was a way to change this? I am assuming it is needing to access camera/microphone, which arent listed in the app permissions.

EDIT FOR ANYONE HAVING THIS ISSUE:
I updated the phone to the latest firmware and it worked properly after that. Thanks again!

(08-09-2017 02:10 PM)jemmerich Wrote:  

(08-09-2017 07:12 AM)Aishion_Yealink Wrote:  

(08-08-2017 06:18 PM)jemmerich Wrote:  Can anyone provide an example of how the y000000000000.boot and app.cfg need to be configured in order to deploy an application? I have confirmed that the GET is fetching both files, but they are not grabbing the APK from the phone system. I can download the file from a PC so it should be accessible. I was just not sure if i had made the config files properly.

Dear,

About how to deploy app on T58V, please kindly download and refer to two files about install third-party app on T58V in below link:

http://download.support.yealink.com/download?path=upload%2Fattachment%2F2017-7-31%2F3%2F42728206-8529-4d57-b3eb-9722dccab413%2FInstalling%20the%20Applications%20on%20Yealink%20Smart%20Media%20​Phones%20V1.1.zip

(1) Deploy guide:
“Installing the Applications on Yealink Smart Media Phones V1.1.pdf”

(2) Disclaimer:
“Disclaimer_for_Unauthorized_Apps_on_Yealink_Android-based_Phone.pdf”

Please read disclaimer before you install the app.

And I attach a boot file and a cfg file you can find in below linkwhich I successfully download APP on my side as an example for you:

http://ftp.yealink.com/?ShareToken=F5D844D085A3116C7D0AA5FFB1C3F3E09FC7DB49

If any question, please feel free to contact us.

Best Regards
Aishion

Thanks, this was very helpful. I had a few syntax errors that were preventing install. I got an app to install; I was wondering how I change the permissions of what the app is allowed to access on the system? I can see in the app settings what it is allowed to see, however it is apparently not getting all the permissions it requires. I wasnt sure if there was a way to change this? I am assuming it is needing to access camera/microphone, which arent listed in the app permissions.

EDIT FOR ANYONE HAVING THIS ISSUE:
I updated the phone to the latest firmware and it worked properly after that. Thanks again!