+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: authorized numbers (/showthread.php?tid=41028)
authorized numbers - SFA1492 - 08-01-2017 04:43 PM
The features "Forward" and "DND" allow to set authorized numbers which can bypass an active setting of forward or DND.
Unfortunately the value of the fields must contain numbers only.
Depending on the configuration my PBXs send a "*" in front of the actual number to mark an internal call. I also know of PBXs which use a "#" instead.
I would like to post a feature request to also accept "*" and "#" as valid characters in those fields.
RE: authorized numbers - Lucia_Yealink - 08-02-2017 06:06 AM
Dear,
For your problme, may i know if the PBX can use the number to mark an internal call? As i can know, in Yeastar PBX, it can also use the number to mark the internal call.
So if it is possible to add 00 or other number to make the intercall in your case? If not, please let me know the reason. Thank you.
Besides , may i know what is the model and firmware version you use?
How many phones you have in total?
Best Regards
Lucia