T48G + EXP40 and multiple accounts - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: T48G + EXP40 and multiple accounts (/showthread.php?tid=41003) |
T48G + EXP40 and multiple accounts - Ds5v50 - 07-20-2017 03:29 PM I have an T48G with added EXP40, There are multiple sip accounts that the phone is registered to. 2 of the accounts use the same extension number IE: 100, 101, and so on. I have BLF settings for account 2 on my EXP40. but not account 1. When I dial a number on account 1 IE: 101 The phone uses the name programmed into BLF of account 2. Is there a setting to tell the phone not to use the BLF to fill in the caller ID of outbound calls? RE: T48G + EXP40 and multiple accounts - anonymous1711612242218 - 07-24-2017 09:44 AM (07-20-2017 03:29 PM)Ds5v50 Wrote: I have an T48G with added EXP40, There are multiple sip accounts that the phone is registered to. 2 of the accounts use the same extension number IE: 100, 101, and so on. I have BLF settings for account 2 on my EXP40. but not account 1. When I dial a number on account 1 IE: 101 The phone uses the name programmed into BLF of account 2. Is there a setting to tell the phone not to use the BLF to fill in the caller ID of outbound calls? Dear User, Would you please send me the config file so I can better understand your question? Go the web user interface, Settings>Configuration>Export CFG configuration files. Select All settings, then click on Export. Thank you Samuel Wang RE: T48G + EXP40 and multiple accounts - Ds5v50 - 07-24-2017 11:51 AM After factory resetting the phone and EXP40 are working together as expected now! Thank you for your help. |