T48G Provisioning - Problem with LDAP - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Auto Provisioning (/forumdisplay.php?fid=14) +--- Thread: T48G Provisioning - Problem with LDAP (/showthread.php?tid=40986) |
T48G Provisioning - Problem with LDAP - Risch - 07-11-2017 11:44 AM Hello Forum Users, i set up my Autoprovisioning Server and CFG Files. Everything works fine but only one thing doenst work. We set one of the Buttons as an LDAP Button. This doenst work, after autoprovisioning it only goes to the local phonebook. If i set the button via webconfig, then it works. I think the problem is that the LDAP configuration as a button is only availabe when LDAP is enabled. How can i solve my problem that this button can be set by autoprovisioning? Here the config for this button: programablekey.1.type = 38 programablekey.1.line = 0 programablekey.1.label = Glob. Telefonbuch programablekey.1.xml_phonebook = 0 Thanks for your support! RE: T48G Provisioning - Problem with LDAP - Jensen_Yealink - 07-13-2017 01:23 PM (07-11-2017 11:44 AM)Risch Wrote: Hello Forum Users,Hi Team, correct, the LDAP should be Enabled first. for the provisioning parameter: programablekey.1.type = 38 programablekey.1.label = ldap.enable ldap.search_type ldap.name_filter ldap.number_filter ldap.tls_mode ldap.host ldap.port ldap.base ldap.user ldap.password ldap.max_hits ldap.name_attr ldap.numb_attr ldap.display_name ldap.version ldap.call_in_lookup ldap.call_out_lookup ldap.ldap_sort ldap.incoming_call_special_search.enable the detail please refer to our admin guide, from page 581: http://download.support.yealink.com/download?path=upload%2Fattachment%2F2017-5-9%2F3%2F22971d83-4883-463a-82fc-5002f174b276%2FYealink_SIP-T2_Series_T19%28P%29%20E2_T4_Series_T5_Series_CP860_IP_Phones_Administrator_Guide_V81_90.pdf BR RE: T48G Provisioning - Problem with LDAP - Risch - 07-14-2017 07:51 AM Hello, thanks for your Support but it doenst work. Here is the CFG which i use: #!version:1.0.0.1 wallpaper_upload.url = http://rps.xxxxxxx.de/xxxxxxx/logot48g.jpg screensaver.upload_url = http://rps.xxxxx.de/xxxxxxscreensavert48g.jpg firmware.url = http://rps.xxxxxx.de/firmware/T48-35.81.0.110.rom phone_setting.backgrounds = Config:logt48g.jpg local_time.time_zone = +1 local_time.time_zone_name = Germany(Berlin) local_time.ntp_server1 = ptbtime1.ptb.de local_time.ntp_server2 = ptbtime2.ptb.de local_time.interval = 86400 local_time.date_format = 3 ldap.enable = 1 ldap.password = xxxxxxxxxx ldap.host = ldap.xxxx.de ldap.base = xxxxxxxxxxxx ldap.user = xxxxxxxxxxxx ldap.name_filter = (|(cn=%)(sn=%)(givenName=%)(o=%)(mail=%)) ldap.number_filter = (|(telephoneNumber=%)(mobile=%)(homePhone=%)) ldap.name_attr = cn sn givenName ldap.numb_attr = mobile telephoneNumber homePhone ldap.display_name = %cn ldap.max_hits = 150 ldap.call_in_lookup = 1 ldap.ldap_sort = 1 programablekey.1.type = 30 programablekey.1.line = 0 programablekey.1.label = Menü programablekey.2.type = 38 programablekey.2.line = 0 programablekey.2.label = Telefonbuch programablekey.3.type = 28 programablekey.3.line = 0 programablekey.3.label = Anrufliste programablekey.3.history_type = 0 programablekey.4.type = 5 programablekey.4.line = 0 programablekey.4.label = Nicht Stören programablekey.4.history_type = 0 RE: T48G Provisioning - Problem with LDAP - Risch - 07-14-2017 07:52 AM Hello, thanks for your Support but it doenst work. Here is the CFG which i use: #!version:1.0.0.1 wallpaper_upload.url = http://rps.xxxxxxx.de/xxxxxxx/logot48g.jpg screensaver.upload_url = http://rps.xxxxx.de/xxxxxxscreensavert48g.jpg firmware.url = http://rps.xxxxxx.de/firmware/T48-35.81.0.110.rom phone_setting.backgrounds = Config:logt48g.jpg local_time.time_zone = +1 local_time.time_zone_name = Germany(Berlin) local_time.ntp_server1 = ptbtime1.ptb.de local_time.ntp_server2 = ptbtime2.ptb.de local_time.interval = 86400 local_time.date_format = 3 ldap.enable = 1 ldap.password = xxxxxxxxxx ldap.host = ldap.xxxx.de ldap.base = xxxxxxxxxxxx ldap.user = xxxxxxxxxxxx ldap.name_filter = (|(cn=%)(sn=%)(givenName=%)(o=%)(mail=%)) ldap.number_filter = (|(telephoneNumber=%)(mobile=%)(homePhone=%)) ldap.name_attr = cn sn givenName ldap.numb_attr = mobile telephoneNumber homePhone ldap.display_name = %cn ldap.max_hits = 150 ldap.call_in_lookup = 1 ldap.ldap_sort = 1 programablekey.1.type = 30 programablekey.1.line = 0 programablekey.1.label = Menü programablekey.2.type = 38 programablekey.2.line = 0 programablekey.2.label = Telefonbuch programablekey.3.type = 28 programablekey.3.line = 0 programablekey.3.label = Anrufliste programablekey.3.history_type = 0 programablekey.4.type = 5 programablekey.4.line = 0 programablekey.4.label = Nicht Stören programablekey.4.history_type = 0 RE: T48G Provisioning - Problem with LDAP - Jensen_Yealink - 07-24-2017 04:12 PM (07-14-2017 07:52 AM)Risch Wrote: Hello, Hi Risch, If still have the issue, please provided the PCAP, config.bin and syslog with level 6. so we can analysis what happened on the phone. how to get the files please refer to FAQ: http://support.yealink.com/faq/faqInfo?id=313 BR Jensen |