+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T48G BLF keys not updating (/showthread.php?tid=40984)
T48G BLF keys not updating - c99hris - 07-10-2017 05:57 PM
I have attached the allconfig.tar with sys level 6, the phones blf keys do not update correctly, the one key shows red where the user is not at their desk or using the phone.
This is the blf config for the phone
linekey.4.label="Carli" linekey.4.line="1" linekey.4.pickup_value ="102" linekey.4.type="16" linekey.4.value="102"
Version T48G
Firmware Version 35.80.0.95
Hardware Version 35.1.0.2.1.0.0
RE: T48G BLF keys not updating - c99hris - 07-11-2017 11:32 PM
Hello Yealink can you please look at the attached file to help me figure out why the BLF keys are not working?
RE: T48G BLF keys not updating - Jensen_Yealink - 07-12-2017 01:39 AM
(07-10-2017 05:57 PM)c99hris Wrote: I have attached the allconfig.tar with sys level 6, the phones blf keys do not update correctly, the one key shows red where the user is not at their desk or using the phone.Hi team,
This is the blf config for the phone
linekey.4.label="Carli" linekey.4.line="1" linekey.4.pickup_value ="102" linekey.4.type="16" linekey.4.value="102"
Version T48G
Firmware Version 35.80.0.95
Hardware Version 35.1.0.2.1.0.0
From the PCAP, we can see the phone received the Notify info from server side, it indicator the call is hang up for Time out.
So i think the extension 102 received an incoming call, but nobody answer it, eventually, the call hang up for Time out.
For BLF LED mode, please refer to our admin guide, from page 604:http://download.support.yealink.com/download?path=upload%2Fattachment%2F2017-5-9%2F3%2F22971d83-4883-463a-82fc-5002f174b276%2FYealink_SIP-T2_Series_T19%28P%29%20E2_T4_Series_T5_Series_CP860_IP_Phones_Administrator_Guide_V81_90.pdf
the syslog provided is level 3, if still have issue, please help to get the syslog with level 6 and share more detail.
thank you.