Yealink Forums
T29G v81 During call set up, intercom or broadcast page will barge in and cancel call - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: T29G v81 During call set up, intercom or broadcast page will barge in and cancel call (/showthread.php?tid=40946)



T29G v81 During call set up, intercom or broadcast page will barge in and cancel call - csmith - 06-20-2017 12:59 PM

I've tried almost all versions of v81 code and they all seem to behave the same way in this scenario.

If user A is making a call to user B, and user B has not answered the call yet (still ringing) and user C makes an intercom call to user A or a group page that user A is in , User A's call to B is cancelled and User C's page/intercom is auto answered.

It does not matter if "Intercom Barge" (features.intercom.barge) is enabled or disabled.

If I downgrade to V80 code, this does not happen.

Tried versions:
46.81.193.110
46.81.193.70
46.81.193.20
46.81.193.15

Diagnostic Files attached


RE:T29G v81 During call set up, intercom or broadcast page will barge in - Fraukas2 - 06-20-2017 01:57 PM

Hi there !

Was about to suggest
Code:
features.intercom.barge=0
but you already tried.

A client of mine is running version X.81.0.20 and I'm running X.81.0.110 and we don't have the problem.

Sorry about that.


RE: - csmith - 06-20-2017 06:47 PM

(06-20-2017 01:57 PM)Fraukas2 Wrote:  Hi there !

Was about to suggest
Code:
features.intercom.barge=0
but you already tried.

A client of mine is running version X.81.0.20 and I'm running X.81.0.110 and we don't have the problem.

Sorry about that.

Thanks for the suggestion, we run X.81.193.X for Broadsoft compatibility. This could be an issue in just that line of code.