+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T42G not sending auto-answer alaert (/showthread.php?tid=40926)
T42G not sending auto-answer alaert - Melissa:) - 06-13-2017 03:35 PM
Hi, We are trying to use intercom on a T42g. We have the button set up correctly. We are not seeing the "Alert-Info:info=alert-autoanswer" coming from the calling T42g. Is there another setting that I need turn on/off to allow a T42g to make a intercom call that will send the "Alert-Info:info=alert-autoanswer". We have this same feature working on a T48g.
RE: T42G not sending auto-answer alaert - Travis_Yealink - 06-14-2017 03:35 AM
(06-13-2017 03:35 PM)Melissa:) Wrote: Hi, We are trying to use intercom on a T42g. We have the button set up correctly. We are not seeing the "Alert-Info:info=alert-autoanswer" coming from the calling T42g. Is there another setting that I need turn on/off to allow a T42g to make a intercom call that will send the "Alert-Info:info=alert-autoanswer". We have this same feature working on a T48g.
Hi,
Please kindly refer below FAQ first:
http://support.yealink.com/faq/faqInfo?id=546
Any misunderstanding, freely to let me know.
Regards,
Travis
RE: T42G not sending auto-answer alaert - Melissa:) - 06-14-2017 12:34 PM
Thanks for answering me. We have that set up on the receiving phone and the originating phone. Our problem is not the receiving phone. The receiving T42G never gets an "Alert-Info:info=alert-autoanswer...etc" because the originating phone isn't sending it out. The invite is not coming out of the T42g with the "Alert-Info:info=alert-autoanswer." We have the T42Gs set up exactly like the T48gs. The T48Gs are working; however, the T42Gs are not.
RE: T42G not sending auto-answer alaert - Travis_Yealink - 06-15-2017 01:27 AM
(06-14-2017 12:34 PM)Melissa:) Wrote: Thanks for answering me. We have that set up on the receiving phone and the originating phone. Our problem is not the receiving phone. The receiving T42G never gets an "Alert-Info:info=alert-autoanswer...etc" because the originating phone isn't sending it out. The invite is not coming out of the T42g with the "Alert-Info:info=alert-autoanswer." We have the T42Gs set up exactly like the T48gs. The T48Gs are working; however, the T42Gs are not.
Hi,
So, in your scenario, T42G and T48G are both receiving phones, when you test with the same originating phone, T48G works fine, but T42G didn't, am I right?
Please kindly provide the trace files to me, if you could provide the trace files of T48G, that would be much helpful.
a. Level 6 syslog
b. PCAP trace
c. Config.bin
You can get the guide from this link to see how to export the issue data(trace files):
http://support.yealink.com/faq/faqInfo?id=311
Regards,
Travis