+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: Possible to show codec? (/showthread.php?tid=40906)
Possible to show codec? - givemeaccess - 06-06-2017 07:19 PM
Is it possible to see the used codec when doing a phone call? I would be interested to see if my configuration is working as intended.
We use T48 and T58 all versions.
RE: Possible to show codec? - complex1 - 06-07-2017 08:22 AM
Hi,
T48G:
When you are in a call it is possible to see the used codec and other information about the call.
To do so please press “More”, which can be found on the touch screen, then press “RTP Status”
T58:
I don’t know.
Hope this answer your question.
RE: Possible to show codec? - anonymous1718628087441 - 06-07-2017 11:22 AM
(06-07-2017 08:22 AM)complex1 Wrote: Hi,
T48G:
When you are in a call it is possible to see the used codec and other information about the call.
To do so please press “More”, which can be found on the touch screen, then press “RTP Status”
T58:
I don’t know.
Hope this answer your question.
Hi Frank,
Thanks for your help.
Dear customer,
This is Paul from Yealink Technical Support Team, nice to meet you.
We have RTCP-XR feature to see the used codec when doing a phone call.
Please add these parameters to your configuration file:
voice.rtcp_xr.enable = 1
phone_setting.vq_rtcpxr.states_show_on_web.enable = 1
phone_setting.vq_rtcpxr.states_show_on_gui.enable = 1
Then you can see the codec during the call, like attached picture T48 and T58.
More details are in the Admin Guide I upload, please refer to.
http://ftp.yealink.com/?ShareToken=7E4AF852006AA730981C17FD13460D1F71C9AED9
BR
Paul
RE: Possible to show codec? - anonymous1718628087441 - 06-07-2017 11:24 AM
(06-07-2017 08:22 AM)complex1 Wrote: Hi,
T48G:
When you are in a call it is possible to see the used codec and other information about the call.
To do so please press “More”, which can be found on the touch screen, then press “RTP Status”
T58:
I don’t know.
Hope this answer your question.
Hi Frank,
Thanks for your help.
Dear customer,
This is Paul from Yealink Technical Support Team, nice to meet you.
We have RTCP-XR feature to see the used codec when doing a phone call.
Please add these parameters to your configuration file:
voice.rtcp_xr.enable = 1
phone_setting.vq_rtcpxr.states_show_on_web.enable = 1
phone_setting.vq_rtcpxr.states_show_on_gui.enable = 1
Then you can see the codec during the call, like attached picture T48 and T58.
BR
Paul