Yealink Forums
Yealink Display time problem - Printable Version

+- Yealink Forums (
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T3xP Series (/forumdisplay.php?fid=22)
+---- Thread: Yealink Display time problem (/showthread.php?tid=40890)

Yealink Display time problem - Premier Tech - 06-01-2017 10:59 AM


i have yealink t23P ip phone and i have problem in display time i dont have internet just local network and there is no ntp server , so i enter date and time manually but the problem when reboot the phone the setting of time manually reseted to automatic via ntp and area
please help me to solve this problem

thank you

RE: Yealink Display time problem - Lucia_Yealink - 06-02-2017 09:02 AM

HI Sir,

As the phone do not contain a battery in it, so it can not save the manually configure time. That is by design.


RE: Yealink Display time problem - Phonism - 06-22-2017 09:25 AM

Are you verifying the time is set correctly on-device and via the exported config? Not just the web-gui option?

In my experience, when provisioning a specific time, it is not uncommon for the web-GUI will not reflect the settings you provisioned but if you export the config, you can see it was set correctly and working just fine.

Perhaps set the time and check again.