+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: T28P re-register remotely (/showthread.php?tid=40829)
T28P re-register remotely - LeeDraper - 05-03-2017 03:48 PM
Hello All
I want to re-register phones(T28P) remotely so I tried to use SIP NOTIFY check-sync. If I set 'reboot' to true then the phone reboots which I don't want. If I set 'reboot' to false then the phone re-provisions but it does not re-register. I also cannot find a Action URI to re-register.
Is there any thing else I can try?
Thank you
Lee Draper
RE: T28P re-register remotely - Kevin_Yealink - 05-04-2017 11:55 AM
(05-03-2017 03:48 PM)LeeDraper Wrote: Hello All
I want to re-register phones(T28P) remotely so I tried to use SIP NOTIFY check-sync. If I set 'reboot' to true then the phone reboots which I don't want. If I set 'reboot' to false then the phone re-provisions but it does not re-register. I also cannot find a Action URI to re-register.
Is there any thing else I can try?
Thank you
Lee Draper
Hi Lee
If you want the phone to re-register, you don't need to use notify or action uri.
Yealink phone support to re-register automatically. Just go to web interface of the phone, then go to register->advanced, then set Session Expires(30~7200s) option.
Or you also can remotely access to web interface of the phone to re-register again.
BR
Kevin