+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: Autoprovision Multicast (/showthread.php?tid=40820)
Autoprovision Multicast - GIWM - 05-01-2017 03:44 PM
I have tested this both on a T40P and a T48G. I have two settings in my provisioning files for multicast:
multicast.receive_priority.priority = 0
multicast.listen_address.1.ip_address = 224.0.1.75:50001
The phones will not take these settings through auto provisioning. The firmware versions are:
T40P: 54.81.0.61
T48G: 35.81.0.61
I tested changing other settings in the auto provisioning file and those settings took, just not the multicast settings.
Can anyone else confirm this?
RE: Autoprovision Multicast - GIWM - 05-01-2017 04:47 PM
I just tested on a T46G with Firmware 28.81.0.61. Same issue.
RE: Autoprovision Multicast - Klaus_Yealink - 05-02-2017 12:20 PM
Hello, please test 28.81.0.70 version from below link:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage
BR
klaus