911 Call Issue on v81 Firmware - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: 911 Call Issue on v81 Firmware (/showthread.php?tid=40816) |
911 Call Issue on v81 Firmware - Chris8792 - 04-27-2017 06:53 PM We are currently having issues making 911 calls on phones using v81 firmware, but if the calls are made using v80 they are working fine. I have a T46S with 81.0.20 firmware, the S model does not offer firmware other than version 81. Once the G models were downgraded to v80 they were fine. This was also the case on the T41P's. Any ideas of ways to resolve this issue? Thanks. RE: 911 Call Issue on v81 Firmware - Klaus_Yealink - 04-28-2017 10:49 AM Can you tell me what's your detail test steps? and could you help to get the config.bin/level 6 log/config.bin files of S model and G model, then we will make a compare. About how to get these files, please refer to this FAQ: http://support.yealink.com/faq/faqInfo?id=311 |