+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: LDAP T23P and Yeastar ? (/showthread.php?tid=40743)
LDAP T23P and Yeastar ? - Atontel - 03-29-2017 02:17 PM
Hi to All,
I've setting LDAP server on my Yeastar S20 System
The phone show my conctact.
But show all conctact.
in the Yeastar I have:
Base DN: dc=pbx,dc=com
PBX DN: ou=pbx,dc=pbx,dc=com
username: cn=rubrica,dc=pbx,dc=com
password: password
Phonebook Node:
1--> ou=pbx,dc=pbx,dc=com /*default I can't change*/
2--> ou=rubrica,dc=pbx,dc=com /+my phonebook*/
the phone show all Phonebooks. But I want see only the 2.
How Can I do setting the phone for showing onli 2nd Phonebook Node?
I've setting the phone in this mode:
https://support.yeastar.com/hc/en-us/articles/235660088-Using-LDAP-on-Yealink-Phone
Thank's
Matteo
RE: LDAP T23P and Yeastar ? - Kevin_Yealink - 03-30-2017 01:01 PM
(03-29-2017 02:17 PM)Atontel Wrote: Hi to All,
I've setting LDAP server on my Yeastar S20 System
The phone show my conctact.
But show all conctact.
in the Yeastar I have:
Base DN: dc=pbx,dc=com
PBX DN: ou=pbx,dc=pbx,dc=com
username: cn=rubrica,dc=pbx,dc=com
password: password
Phonebook Node:
1--> ou=pbx,dc=pbx,dc=com /*default I can't change*/
2--> ou=rubrica,dc=pbx,dc=com /+my phonebook*/
the phone show all Phonebooks. But I want see only the 2.
How Can I do setting the phone for showing onli 2nd Phonebook Node?
I've setting the phone in this mode:
https://support.yeastar.com/hc/en-us/articles/235660088-Using-LDAP-on-Yealink-Phone
Thank's
Matteo
Hi Matteo
This is Kevin from Yealink support team, nice to know you.
For your question, please kindly let me know the firmware of the phone.
Seems that you can use T23P to search contacts from LDAP server, it will push all the contact to the phone. right? Can you also send a video to show the issue?
For the issue, do you try to ask Yeastar for help? Please kindly let me know if any update.
To locate the reason of this issue, please kindly reproduce the issue again and send all pacp,syslog,config.bin files to me, then i can do more troubleshooting.
For how to export the files, you can refer to the FAQ:
http://support.yealink.com/faq/faqInfo?id=311
May i know how many phones in your side.
BR
Kevin