+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: BLF/DSS key settings (/showthread.php?tid=40740)
BLF/DSS key settings - VG - 03-29-2017 08:35 AM
We are using a system that has a difference in using sip-accounts and user accounts.
A device is configured with i.e. 31500001 sip account. But to keep it simmpl other users can dial 201 to reach that phone.
When i configure the BLF in a yealink device(t46, t27 for example) i need to use the voip account to check the blf. But when that key is used it dials to 31500001. The users are getting confused about it.
It is possible to configure that BLF checks the voip account, but when the user presses the dsskey the phone diales to 201.
RE: BLF/DSS key settings - andolini7110 - 07-03-2017 03:40 PM
Any details on this as i am facing same prob
RE: BLF/DSS key settings - rpenrod - 09-30-2017 08:16 PM
We set this from our provisioning server; here's an example:
linekey.7.line = 1, where 1=sip account to use
linekey.7.value = 110
For your use case, you would set the above linekey.7.line value to whatever sip account you want to use. So, if you wish to use account 2, you would define the key as:
linekey.7.line = 2