+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: T40P DSS Deal Type? (/showthread.php?tid=40737)
T40P DSS Deal Type? - GIWM - 03-28-2017 08:13 PM
I am setting up some T40P units and in my provisioning template set:
transfer.dsskey_deal_type = 0
However, the T40P units don't seem to take this setting. Firmware is 54.81.0.60. I can change it in the web interface and it works just fine.
Any idea what I may be doing wrong?
RE: T40P DSS Deal Type? - CWR - 03-28-2017 08:33 PM
transfer.dsskey_deal_type = 0 worked fine on my T48G.
Have you exported your config file just to check that Yealink didn't have a spelling issue in the programming... never know.
RE: T40P DSS Deal Type? - GIWM - 03-29-2017 12:13 PM
(03-28-2017 08:33 PM)craigreilly Wrote: transfer.dsskey_deal_type = 0 worked fine on my T48G.
Have you exported your config file just to check that Yealink didn't have a spelling issue in the programming... never know.
It worked fine on my T46G as well. Just not the T40P.
When I did the export settings on the T40P, there's no dss anywhere to be found. In fact, there are only two transfer. settings.
Perhaps I need to make a feature request? Though nothing indicates it SHOULDN'T work.
RE: T40P DSS Deal Type? - jolouis - 03-29-2017 12:30 PM
Sounds like a bug, especially if it works properly from the web interface without issue. Unfortunately I don't have a T40 here to test and confirm but it's probably worth submitting a request to Yealink support to have them check it.
RE: T40P DSS Deal Type? - Travis_Yealink - 04-26-2017 02:08 AM
It's confirmed to be a bug, and we release a new firmware to fix this issue: 54.81.0.76
http://ftp.yealink.com/?ShareToken=74E1FECDCFCB51DEF40DD2B46BEACB84C275ADE7
Regards,
Travis_Yealink
RE: T40P DSS Deal Type? - GIWM - 04-26-2017 05:50 PM
(04-26-2017 02:08 AM)Travis Wrote: It's confirmed to be a bug, and we release a new firmware to fix this issue: 54.81.0.76
http://ftp.yealink.com/?ShareToken=74E1FECDCFCB51DEF40DD2B46BEACB84C275ADE7
Regards,
Travis_Yealink
That firmware does indeed fix the bug. Thank you for getting this fixed for us!