+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T48G DND (/showthread.php?tid=40729)
T48G DND - Freddy - 03-27-2017 07:24 AM
Where did the option to set DND code move to ?
In the old firmware on our T48G, the option to set a nother DND code was possible in
"features" - "Forward&DND)
In the firmware i get from the 3cx server 35.81.0.60 there is no option to set another DND code..
How to set the DND code to the specific DND code on our 3cx server ??
(*60 off, *61 on)
Best regards from Denmark
/Freddy
RE: T48G DND - CWR - 03-27-2017 08:36 PM
So I added this to the template:
features.dnd.on_code = *32
features.dnd.off_code = *30
and it works just fine.
I have an email into my contact to see why it is not in the WebGui.
RE: T48G DND - CWR - 03-31-2017 05:14 PM
It has been recommended to try a newer firmware which did not help.
They have asked me to do Recovery Mode- however, I do not have time to go thru this right now.