Yealink Forums
T48G - send no busy code w/o enabling the Call Waiting feature - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T48G - send no busy code w/o enabling the Call Waiting feature (/showthread.php?tid=40720)



T48G - send no busy code w/o enabling the Call Waiting feature - sani390 - 03-24-2017 10:26 AM

Because of a annoying setting issue with my pbx provider, I am looking for a way to disable the busy signal when I am already on the phone. In a way that the caller receives the normal waiting tone. Is there a way to achieve this without enabling the Call Waiting feature?


RE: T48G - send no busy code w/o enabling the Call Waiting feature - sani390 - 03-24-2017 01:07 PM

Answering this myself so anyone who might find a similar problem could use it as solution:

It's quiet simple as it is effective: just disable the Call Waiting tone in the Features menu below the "Call Waiting" setting. This way, there is no "busy now" code sent and no annoying beep while talking with the current partner.


RE: T48G - send no busy code w/o enabling the Call Waiting feature - complex1 - 03-24-2017 01:18 PM

Hi sani390,

Glad to hear the issue is resolved and thank you for update the post.