+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: T42G Pause in speed dial (/showthread.php?tid=40699)
T42G Pause in speed dial - mcbsys - 03-17-2017 02:27 AM
I have a T42G running firmware 29.81.0.60.
I have added the following line to the provisioning file:
features.enhanced_dss_keys.enable = 1
On a 3CX phone system with 2-digit extensions, I want to check the voicemail of extension 11. So I set up a speed dial to dial 99, pause 1 second, then dial 11 and #:
99$Cp1$11#
When I press that speed dial, the entire string is passed to the VoIP provider. 3CX sends me this email:
"Call or Registration to 99$Cp1$11#@(Ln.10001@My SIP Account) has failed. "
I also tried this Speed Dial (with "wc" = wait connect), but had the same problem:
99$Cwc$11#
How do I insert a pause into a speed dial string?
Thank you,