Yealink Forums
LDAP access with T41P - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: LDAP access with T41P (/showthread.php?tid=40661)



LDAP access with T41P - SFA1492 - 03-02-2017 05:44 PM

Hi everybody!

When I access my PBXs phonebook via LDAP I get the following result:
John Smith <5552343> 5552343

So the number of the person to call is being put in brackets behind the name and then again without the brackets.
I also have a T46G and a T21P E2 accessing the same phone book. Their display of the results is as I would expect it:
John Smith 5552343

I already contacted the yealink support about this issue sometime in summer last year and was told that it was designed that way. Since the additional display of the phone number in brackets behind the name makes no sense for me whatsoever and since other phones display the results "the right way" I would like to make a feature request for a future firmware for the T41P:
Please remove the display of the phonenumber in brackets behind the name.


RE: LDAP access with T41P - Jensen_Yealink - 03-08-2017 07:42 AM

Hi SFA1492,

thanks for your info, i have feedback and discussion with our PM team, they will evaluate on this.
thank you and have a nice day.


RE: LDAP access with T41P - SFA1492 - 04-05-2017 03:01 PM

I just updated my Firmware from release 36.81.0.25 to 36.81.0.70 and guess what: You guys did it. Smile
LDAP entries are being displayed as they should. Thanks a lot! That makes a good phone even better.