+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Reboot after Web UI enable (/showthread.php?tid=40659)
Reboot after Web UI enable - Simonburns - 03-02-2017 11:22 AM
Hi again,
The problem I now have is that when I enable the web ui, the phone reboots once, and then immediately a second time. After the second reboot, it takes the phone out of admin and disables the web ui.
Can you help?
RE: Reboot after Web UI enable - Simonburns - 03-02-2017 02:27 PM
Ok, so it turns out the provider we are using is blocking access, apparently it's for security reason!?!?!?
Is this common? Is there a way around it?
RE: Reboot after Web UI enable - Lucia_Yealink - 03-03-2017 10:18 AM
Dear Sir，
What the phone model and firmware version? Who is your provider?
It is common that the provider set the access limit for you. And we can not around it for you.
If you want to access to the wui, you can contact your provider to let him open the limit for you.