+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: Software Issue (/showthread.php?tid=40651)
Software Issue - ghassan - 02-27-2017 09:11 AM
Hello all,
Problem 1:
I have a VP-2009 with firmware v20.21 device work fine except when ever i call externally, after ringing it will reboot if i dial an extension.
I did reset to factory but still not working.
Problem 2:
I got a new same device with firmware 20.19, when i tried to upgrade to firmware 20.30 it did upgrade successfully and asked for reboot but after reboot it gave a white screen. look like there is no image at all.
can any one help me please?
Thank you.
RE: Software Issue - Patrick Hogan - 03-10-2017 06:51 PM
Hi ghassan, have you found a solution to this yet? We're having the same problem as well.
RE: Software Issue - ghassan - 03-22-2017 02:18 PM
Hello .. Patrick Hogan
Not yet .. sorry
hope someone have
RE: Software Issue - complex1 - 03-22-2017 03:39 PM
(02-27-2017 09:11 AM)ghassan Wrote: Hello all,
Problem 1:
I have a VP-2009 with firmware v20.21 device work fine except when ever i call externally, after ringing it will reboot if i dial an extension.
I did reset to factory but still not working.
Problem 2:
I got a new same device with firmware 20.19, when i tried to upgrade to firmware 20.30 it did upgrade successfully and asked for reboot but after reboot it gave a white screen. look like there is no image at all.
can any one help me please?
Thank you.
Hi,
I am afraid the VP-2009 is not supported anymore, at least not in firmware releases.
This device isn’t even on the list of EOL Products.
The VP2009 is replaced by VP530 which is replace by the VP-T49G.
A quick search on the internet learn that this device was introduced somewhere mid 2010.
RE: Software Issue - Quinlan_Yealink - 04-25-2017 01:21 PM
hi
please test the latest FW：http://support.yealink.com/documentFront/forwardToDocumentDetailPage?documentId=24