+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: EXP40 Entrys get lost > 3CX (/showthread.php?tid=40639)
EXP40 Entrys get lost > 3CX - Alexander2 - 02-22-2017 11:52 AM
Hello,
we are using T46G with 28.81.0.25 FW on 3CX. The phones are configured to reprovision themselfs on sunday night. But after re-provisioning the EXP40 modules are blank. The colleges have configured them by hand... now we try to use the BLF settings from 3CX server... I have configured BLFs for the users but the appear on the phone and not on the EXP40 ... we have set this option to 1:
#Specify the prior of the line keys and EXP keys when automatically configure the blf list0-Configure the line keys first, 1-Configure the EXP keys first;
phone_setting.blf_list_sequence_type = 1
Where is the problem? Does we have to change another setting too?
Thanks for helping us.
RE: EXP40 Entrys get lost > 3CX - Alexander2 - 02-23-2017 09:45 AM
BUMP - any ideas?
RE: EXP40 Entrys get lost > 3CX - Karl_Yealink - 03-01-2017 06:51 PM
Hi,
Can you help us to capture the trace files, we can check more from them.
You will know the method via this FAQ: http://support.yealink.com/faq/faqInfo?id=313
Please try to provision then configure the BLF list for test then export the three trace files.