Yealink Forums
Caller ID is showing old details on target phone - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: Caller ID is showing old details on target phone (/showthread.php?tid=40555)



Caller ID is showing old details on target phone - Firewall - 01-24-2017 04:37 AM

Hi, we have T22P phones, and have setup all extension details etc. Things have been working fine:

e.g. Extension 201 is for Bob. When we ring Extension 202 from 201, caller ID on extension 202 shows the phone call as coming from Bob.

That's as expected.

But if we change the extension details for 201 to John, when we ring Extension 202, caller ID on extension 202 still shows the phone call as coming from Bob (and not the new name John).

Any ideas on how to fix this?

Many thanks.


RE: Caller ID is showing old details on target phone - CWR - 01-24-2017 04:36 PM

Are you using a phonebook? Try updating the phonebook on the incoming device.


RE: Caller ID is showing old details on target phone - Firewall - 01-25-2017 12:10 AM

Not using a phonebook, all extensions are connected to a MyPBX, this is where the extensions are setup, and where we make changes.


RE: Caller ID is showing old details on target phone - Kevin_Yealink - 02-05-2017 12:12 PM

(01-25-2017 12:10 AM)Firewall Wrote:  Not using a phonebook, all extensions are connected to a MyPBX, this is where the extensions are setup, and where we make changes.

Hello

For the issue, can you export the pacp,syslog,config.bin files to me,it can help to solve the issue soon.

For how to get the files, you can refer to the FAQ:
http://support.yealink.com/faq/faqInfo?id=311
NOTE:you should set syslog level as 6, then use 201 to call 202, then export all the files to me.

BR
Kevin