+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: Dect Phone Series (/forumdisplay.php?fid=6)
+--- Forum: W52P (Wireless) (/forumdisplay.php?fid=23)
+--- Thread: Firmware won't upgrade to handset (/showthread.php?tid=40504)
Firmware won't upgrade to handset - Jeroen - 01-09-2017 07:38 AM
L.s.
Given 3CX Specifications, I need to upgrade the firmware for yealink W52 base and handhelds. We need this for the Multi handset provisioning, new in the 3cx v15 pbx.
De base upgrade went without problems.
The handsets, however are a problem.
THew current handset firmware is 26.50.188.1 and we need to upgrade it to 61.80.0.15. Since upgrading trough the website of the base does not work,
I wanted to try to upgrade the firmware using an usb cable I did download the W52x Firmware Update tool. I put all the files in the root directory. However, when i try to upgrade i get the message: " Bootloader is to new to support File system, skip update"
Since we only have windows 10 Devices here, in compliance wiht iso policy, downgrading of the windows system is a no go.
[/php]
So how can i upgrade the handsets?
RE: Firmware won't upgrade to handset - complex1 - 01-09-2017 11:23 AM
Quote:THew current handset firmware is 26.50.188.1 and we need to upgrade it to 61.80.0.15. Since upgrading trough the website of the base does not work,
Hi Jeroen,
There are two thing you have to know:
1. Handset with firmware 26.50.188.1 is a customized firmware (with Dutch language) from distributor Lydis and this is only running on a W52H handset.
Customers cannot upgrade this firmware. If you want to upgrade please contact Lydis support.
2. Handset firmware 61.80.0.15 is firmware for the W56H handset which is a different handset and this firmware cannot flashed into a W52H handset.
Please keep in mind that this firmware does not contain the Dutch language.
3CX v15 SP4 and W52 base on firmware 25.73.0.40 is running fine.
There is no need to upgrade the firmware (base or handset)
RE: Firmware won't upgrade to handset - nicvon - 06-06-2017 05:40 AM
I had a similar problem with installing the driver for the phone on windows 10 with the flasher software.
On the Flasher exe file do the following
Right Click -> Properties -> Compatability
Select Windows 7 under the compatability mode & Run as administrator
After this, I had to close the flasher program, disconnect the USB from the from the phone, re-open and reconnect the phone and it comes up in the list of devices.
This solved my problem of installing the phone driver on Windows 10 x64 Pro
RE: Firmware won't upgrade to handset - complex1 - 06-06-2017 04:58 PM
Hi nicvon,
You are quite right, but if your handset contain customized firmware, like the OP have, you can’t flash the handset with other firmware only than customized firmware from the same supplier.
e.g. if the handset runs 26.50.188.1 you can upgrade to 26.80.188.1 but not to 26.80.0.15
Hope this helps.