Yealink Forums
How do I know which entry to use version 81 in provisioning. - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: How do I know which entry to use version 81 in provisioning. (/showthread.php?tid=40495)



How do I know which entry to use version 81 in provisioning. - Serwis Kontel - 01-05-2017 08:48 AM

How do I know which entry to use version 81.
I have a phone T21 E2 FV 52.81.0.25, HV 52.0.0.0.0.0.0
Documentation Yealink_SIP-T2_Series_T19(P) E2_T4_Series_IP_Phones_Administrator_Guide_V81_20.pdf given that, for example: static.directory_setting.url = . Meanwhile, the phone recognizes only the entry: directory_setting.url


RE: How do I know which entry to use version 81 in provisioning. - Lucia_Yealink - 01-06-2017 11:15 AM

Dear Sir,

Yes,in V81, the parameter is: "static.directory_setting.url=". But it can also recognizes the parameter:"directory_setting.url= "

Please make sure the auto provision file is correct.
About how to do auto provision, please refer to the guide below:

http://download.support.yealink.com/download?path=upload%2Fattachment%2F2016-12-1%2F3%2F509130be-c1ef-47bd-be76-c6a952824d28%2FYealink_SIP-T2%20Series_T19%28P%29%20E2_T4_Series_IP_Phones_Auto_Provisioning_Guide_V81_20.p​df

Any question, please let me know.

Regards


RE: How do I know which entry to use version 81 in provisioning. - Serwis Kontel - 01-09-2017 08:15 AM

I want to achieve such an effect as in the Annex.
What should then enter in my phone, would phone wanted to read static.directory_setting.url.
With entries like this does not work:

y000000000000.boot:
#!version:1.0.0.1
## The header above must appear as-is in the first line
include:config <y000000000052.cfg>
overwrite_mode = 0

y000000000052.cfg:
#!version:1.0.0.1

##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.##

################################################################################​#######
## Autop URL ##
################################################################################​#######
static.auto_provision.server.url = http://172.30.10.239/Http-ser/
static.auto_provision.server.username =
static.auto_provision.server.password =

################################################################################​#######
## Contact ##
################################################################################​#######
ocal_contact.data_photo_tar.url =

###(Except T20P Model)
static.directory_setting.url = http://172.30.10.239/Http-ser/XML/favorite_setting/favorite_setting.xml


favorite_setting.xml:
<root_favorite_set>
<item id_name="localdirectory" display_name="Local Directory" priority="1" enable="1" dev="common"/>
<item id_name="history" display_name="History" priority="2" enable="0" dev="common"/>
<item id_name="networkcalllog" display_name="Network CallLog" priority="3" enable="0" dev="common"/>
<item id_name="remotedirectory" display_name="Remote Phone Book" priority="4" enable="1" dev="common"/>
<item id_name="ldap" display_name="LDAP" priority="5" enable="0" dev="T21 T23 T40 T27 T27G T29 T41 T42 T42S T41S T46 T46S T48 T48S T49 T61 T66 T69 T69S"/>
<item id_name="broadsoftdirectory" display_name="Network Directories" priority="6" enable="0" dev="common"/>
</root_favorite_set>


RE: How do I know which entry to use version 81 in provisioning. - Lucia_Yealink - 01-09-2017 08:50 AM

Dear Sir,

Thank you for your detail info.

After checked the parameters you describe, it is correct for the phone.

Can you kindly provide the level 6 syslog, config.bin and pace trace when you do auto provision, so that we can locate the problem. Thank you.
About how to get the three files, please refer to the FAQ below:
http://support.yealink.com/faq/faqInfo?id=313

Please also provide the directory .xml file to me.You can send it to Lucia@yealink.com.

Beside, please check for me if you use the parameter "directory_setting.url " to do provision, can it work well?

Thank you for your info in advanced.


RE: How do I know which entry to use version 81 in provisioning. - Lucia_Yealink - 01-12-2017 06:19 AM

Sorry for my late reply.

And I have done a test with your configuration and found you are right. The parameter “static.directory_setting.url” can not be recognized by the phone.

Suggest to use the parameter “directory_setting.url=” to do auto provision. And I will feedback this issue to our R&D and PD to modify it.
Thank you for your concern about this.