Yealink Forums
POE Power requirement SIP-T48G - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: POE Power requirement SIP-T48G (/showthread.php?tid=40471)



POE Power requirement SIP-T48G - MICHAEL - 12-29-2016 10:49 PM

All,
I just purchased the Yealink SIP-T48G but the power adapter will take a lot longer than the phone. I have the below adapter which was powering my old phone will this work with the T48G.


Avaya IP Phone Single Port PoE Injector SPPOE-1A with Power Cord (700500725)

- Avaya SPPOE-1A Features
IP phone power injector that provides electrical power through the data port
Used when a 802.3af PoE switch is not available
Includes Power Cord
- Compatibility
The Avaya SPPOE-1A is compatible with the Avaya 9608, 9611G, 9621G, and - 9641G IP telephones
Also works with any IP telephone that is compatible with 802.3af Power over Ethernet (PoE)


RE: POE Power requirement SIP-T48G - MICHAEL - 01-02-2017 12:22 PM

Update: The POE power adapter works fine.

Thread closed


RE: POE Power requirement SIP-T48G - Leah_Yealink - 01-05-2017 09:05 AM

(01-02-2017 12:22 PM)MICHAEL Wrote:  Update: The POE power adapter works fine.

Thread closed

Hi Michael,

Sorry for the late reply. Power consumption(PoE) of T48G is 2.4W (idle) and 10.5W (max).



Best Regards,
Leah