+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: BLF Trunk Monitor Elastix (/showthread.php?tid=40469)
BLF Trunk Monitor Elastix - Ricardo111 - 12-29-2016 02:27 PM
Hello All,
I have a T28P (Firmware: 2.72.0.80 Hardware: 1.0.0.3) and Elastix 2.5.0.
I'd like to monitor the status of DAHDI and SIP Trunks (as BLF to the extensions). How can I do that?
It is very important because some departments use the DAHDI TRUNK and the Operator doesn't know, if the line is in use or not.
Thanks in advance,
Ricardo Silva
RE: BLF Trunk Monitor Elastix - Jensen_Yealink - 12-30-2016 10:13 AM
Hi Ricardo111,
The monitor of DAHDI and SIP Trunk status feature is the server side function.
The server side need to know the status of the trunk and sent the status in notify to the phone.
the config on the phone is the same to the monitor of an extension.
memorykey.1.line = 1
memorykey.1.value = pstn3
memorykey.1.type = 16