Add USB port to power external device (DECT handset dock, headset, ...) - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Wishlist (/forumdisplay.php?fid=13) +--- Thread: Add USB port to power external device (DECT handset dock, headset, ...) (/showthread.php?tid=40460) |
Add USB port to power external device (DECT handset dock, headset, ...) - oliv - 12-26-2016 11:00 AM Hello, Phone operators need accessories than are very often these days, USB-powered. Some of them such as DECT handset dock or headset charging dock have lower power requirements (<3W). Having a USB port available just to power these devices would be a unique feature: one PoE cable to power both a deskphone and its headset ! Best regards RE: Add USB port to power external device (DECT handset dock, headset, ...) - Jensen_Yealink - 12-27-2016 05:03 AM Hi Oliv, thanks for your advice. We are going to release the new T4S series(T41S/T42S/T46S/T48S) soon, all the T4S will support USB 2.0 port(5V/500mA). The USB port is for BT dongle and WIFI dongle, but not for USB charging, but i think you can try it after they are release. for the other models, i will feedback to our PM to evaluate this in our future product design. thank you RE: Add USB port to power external device (DECT handset dock, headset, ...) - oliv - 12-27-2016 05:19 PM Thanks for sharing this info (T41S/T42S/T46S/T48S) here. Maybe a power-only USB cable would make this work without any software or hardware mod. If USB port is required to host a BT dongle, then a second USB port (power-only or not) would be also needed to power a headset. Best regards |