Replacing the DND button - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Auto Provisioning (/forumdisplay.php?fid=14) +--- Thread: Replacing the DND button (/showthread.php?tid=4029) |
Replacing the DND button - JacksonM - 06-30-2015 08:46 PM I've been doing some research and I was wondering if there was a way to replace the DND button on the T41P, T42G, T48G and T46G phones with another label and action. So far i've not found any thing other then how to disable the button. RE: Replacing the DND button - James_Yealink - 06-30-2015 10:14 PM Hi Jack, You can go to phone web interface-> DSSKey-> Programable Key, change the DND softkey to other type. Regards, James RE: Replacing the DND button - JacksonM - 07-01-2015 12:42 AM (06-30-2015 10:14 PM)Yealink_James Wrote: Hi Jack, Thanks for your reply James! Is this also programmable via an auto provisioning template? RE: Replacing the DND button - James_Yealink - 07-01-2015 06:09 AM Yes, programablekey.3.type = 0-N/A 2-Forward 5-DND 7-ReCall 8-SMS 9-Direct Pickup 13-Spead Dial 22-XML Group 23-Group Pickup 27-XML Browser 28-History 30-Menu 32-New SMS 33-Status 34-Hot Desking (only applicable to SIP-T48G/T46G/T29G IP phones) 38-LDAP 40-Prefix 41-Zero Touch 43-Local Directory 44-Network Directory 45-Local Group 46-Network Group 47-XML Directory 50-Phone Lock 51-Switch Account Up 52-Switch Account Down |