Caller ID - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Configuration (/forumdisplay.php?fid=24) +--- Thread: Caller ID (/showthread.php?tid=3976) |
Caller ID - GJB - 06-19-2015 02:49 AM The Caller ID information is cut off on the T38g. Is there a way to format it to see the entire ID, or maybe remove the photo to give it more room to display. It shows Wireless Calle. Should say Wireless Caller:Metro. Thanks RE: Caller ID - James_Yealink - 06-19-2015 06:03 AM Sorry, currenlty there is no an option to adjust the display method in T38. Regards, James RE: Caller ID - GJB - 06-19-2015 10:08 PM Is there a yealink model that is available so I can see the whole caller ID? Thanks RE: Caller ID - James_Yealink - 06-19-2015 11:19 PM In T29/T46/T48 you can see whole name. In T19_E2/T21_E2/T23/T27/T41/T42, phone will scroll the caller-ID when it's out of limit. Regards, James RE: Caller ID - GJB - 06-20-2015 01:39 AM Thanks For the info. Maybe a upgrade to the 38 in the future? RE: Caller ID - James_Yealink - 06-20-2015 02:25 AM Currenlty there is no a plan to upgrade T38 in short time. Regards, James RE: Caller ID - GJB - 06-27-2015 05:48 AM Ok, I just purchased a T46G and it does as you say which is great. Can I have different ringtones for the different ring groups. Wireless Caller:Metro one ring tone Wireless Caller:Premiere different ring tone. Thanks for the help. |