T42G BLF lights no longer light up, - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: T42G BLF lights no longer light up, (/showthread.php?tid=3962) |
T42G BLF lights no longer light up, - Charliestott - 06-17-2015 11:56 PM Hi I have updated the firmware and noticed my BLF lights are no longer lighting up at all. not sure if they have failed or it is a new setting, firmware ver is 29.73.0.50 Is there any way to test all the lights to at least tell if they work or not.. i have other phones and they are fine. Thanks RE: T42G BLF lights no longer light up, - James_Yealink - 06-18-2015 12:20 AM Hi, If you make a call to the monitored nubmer will BLF light up? If yes, please set the BLF LED mode under feature-> General information to 0. What's your PBX server? You can use XML Browser to test the light, the follow script will ligth up line key1 and line key2. <?xml version="1.0" encoding="ISO-8859-1"?> <YealinkIPPhoneExecute Beep="yes"> <ExecuteItem URI="Led:LINE1=on"/> <ExecuteItem URI="Led:LINE2=on"/> </YealinkIPPhoneExecute> Regards, James RE: T42G BLF lights no longer light up, - Charliestott - 06-18-2015 04:50 PM Hi James Don't believe it re-set all to factory and re-did register and re-enter blf fields and every thing works again,, Crazy !! Thanks |