Yealink Forums
BLF Backup Server T46G - Printable Version

+- Yealink Forums (
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: BLF Backup Server T46G (/showthread.php?tid=3940)

BLF Backup Server T46G - jrosaso - 06-12-2015 07:46 AM

Hi every body,

I have problems with dsskey BLF´s,we have telefony T46G firmware and work under redundancy SIP Server. The BLF´s was set and work but the SIP Server main fail the BLF´s on backup SIP Server don´t work. I don´t iknow if exist any way to set BLF´s on both accounts (main and backup), this to fix the BLF´s on the backup server or if exist another way to fixed let me know.


Best regards!!

RE: BLF Backup Server T46G - Flora_Yealink - 06-13-2015 12:19 AM

Hi ,
Please first make sure both main server and back server has the BLF feature
and you use Failover or Fallback mode ?
If using fallback mode, only basic feature can work in back up server.
and please use successive registration mode on the phone.

please refer to adminstrator guide (server redundancy part) and let us know if any question.
Best Regards!

RE: BLF Backup Server T46G - jrosaso - 06-13-2015 02:23 AM

Thanks for answer Flora,

Both server have same features, about server redundancy we don´t have a mode failover because don´t have DNS SIP Server implemented, the backup server was set in the phone as SIP Server 2, we have one IP´s for each server.

To fixed the problem would have to use DNS (failover)? or exist another way no try work BLF´s when the SIP Server 1 fail.

Best regards!