Yealink Forums
auto provision scheduling in periodic minutes - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: auto provision scheduling in periodic minutes (/showthread.php?tid=3935)



auto provision scheduling in periodic minutes - arvind.zapp - 06-11-2015 04:19 PM

Hi I am trying to enable periodic provisioning. But facing some problem.
Once a value is set for the first time in auto_provision.schedule.periodic_minute parameter, I am not able to replace it with new value.

for e.g. first time i had following in config file:
auto_provision.mode = 4
auto_provision.schedule.periodic_minute = 10
It was set to 10 minutes but i tried to changing it to 60 minutes later which is not happening. It remain 10 now no matter what i write in config file unless do a factory reset.

auto_provision.mode = 4
auto_provision.schedule.periodic_minute = 60

Model: T21, Firmware :34.71.0.90.rom

Can any one tell me whats the problem?
Thanks,
Arvind


RE: auto provision scheduling in periodic minutes - Flora_Yealink - 06-11-2015 09:45 PM

Hi ,
I have tested it in my side it can work well, woud you please share the provisioning file that i can test it in my side.
and you used the old version 34.71.0.90.rom, please upgrade it to the latest version , you can download it from below link,

http://support.yealink.com/attachmentDownload/download?path=upload%2Fattachment%2F2015-3-12%2F6%2Ff9d26a82-a5ab-48d4-b3cc-04762b4c86bf%2F34.72.0.75.zip

Best Regards!
Flora


RE: auto provision scheduling in periodic minutes - arvind.zapp - 06-16-2015 07:00 PM

it does not work in the version i have specified. Works in newer versions.