+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: Dect Phone Series (/forumdisplay.php?fid=6)
+--- Forum: W52P (Wireless) (/forumdisplay.php?fid=23)
+--- Thread: Ring Timeout 15 seconds (/showthread.php?tid=3911)
Ring Timeout 15 seconds - krugermj@gmail.com - 06-04-2015 05:34 PM
Good Day,
My Yealink W52H stops ringing after 15 seconds and all forward rules are disabled.
I upgraded to the latest Firmware on the BS & H (25.73.0.27 & 26.73.0.11)
I cannot find a settings on the interface to increase the ring time.
Can anyone please point me in the right direction?
Thank You
Marius
RE: Ring Timeout 15 seconds - James_Yealink - 06-04-2015 11:02 PM
Hi Marius,
You need set the timeout in pbx server. The call should be hung up by server side.
Please contact your server administrator.
Regards,
James
RE: Ring Timeout 15 seconds - krugermj@gmail.com - 06-05-2015 01:26 AM
Hi James,
Thank you for the reply. I did set the ring timeout to 30 seconds. It is a FreePBX Distro Install running Asterisk 11.
I even tried setting the timeout to 60 seconds.
I also registered the main trunk to the phone directly and I get the same 15 seconds results.