Yealink Forums
T27 V80 Firmware - BLFs Inoperable with Freeswitch - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: T27 V80 Firmware - BLFs Inoperable with Freeswitch (/showthread.php?tid=3874)

Pages: 1 2


RE: T27 V80 Firmware - BLFs Inoperable with Freeswitch - Abe1048 - 01-19-2016 04:44 AM

(06-04-2015 05:29 PM)Flora Wrote:  Hi Rob,
For the transfer issue, do you mean the scenario is like below,
T27 are in the call with another party B
T27 press transfer button, dial B's number and press OK button , when B answer the call , T27 press transfer button again ,right ?
in this case, T27 first should send Invite message to hold B and then send the Refer message and when inbound call, the phone send the invite message normally but the server response with 481 . is there any brand phone that can work well´╝č

If yes, would you please share us the pcap trace for the working brand phone?
and also ,please provide us config.bin file , pcap trace and level 6 syslog for these two scenarios that we can ask the engineer to check .
You can refer to below link,
http://forum.yealink.com/forum/showthread.php?tid=1319
Best Regards!
Flora



BTW, normally one thread just for discussing the same topic , please open a new thread for a new topic.


Best Regards!
Flora

Good News Everyone!

We got an email from Yealink support with a new Firmware resolved the BLF issue.


RE: T27 V80 Firmware - BLFs Inoperable with Freeswitch - deutschnaftyula - 01-20-2016 10:20 PM

can you share with us the new FW?