+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: Server Redundancy on Yealink IP Phones (/showthread.php?tid=3841)
Server Redundancy on Yealink IP Phones - Gilb - 05-21-2015 06:58 PM
Hi,
How to set Server Redundancy on Yealink IP Phones?
What is require from me to do?
which type of Yealink ip phone it support?
Thanks.
RE: Server Redundancy on Yealink IP Phones - James_Yealink - 05-21-2015 09:44 PM
Hi Gilb,
Yealink phone support failover mode and Fallback mode.
To apply failover mode you need to configure in DNS server.
To apply fallback mode just fill the server 1 and server 2 in the register interface. When server 1 go down phone will register to server 2.
For more info please refer to administrator guide. Just search key word redundancy.
Regards,
James
RE: Server Redundancy on Yealink IP Phones - Gilb - 05-22-2015 05:49 PM
Which type of phones and what firmware support failover and fallback modes?
RE: Server Redundancy on Yealink IP Phones - James_Yealink - 05-22-2015 09:28 PM
T2x with V71/V72/V73.
T3x with V70
T4x with V71/V72/V73
Dect with V71/V72/V73
CP860