+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Configuration phone (/showthread.php?tid=3825)
Configuration phone - Gilb - 05-19-2015 12:13 AM
Hi,
1. what are the differences between T23 to T23P?
2. Can I set / change setting to all phone using script?
3. when phone start up it does resolving to address of it and then trying register to the ip address he got from the resolving of the address.
can I change the resolving time of phone?
4. when I got connected to the phone can I set it automatically to do resolving and registered to server?
RE: Configuration phone - CWR - 05-19-2015 03:52 AM
The 23P is 10/100 switch and the 23G is Gigabit.
Much of your other questions depend on the PBX you are using.
RE: Configuration phone - Gilb - 05-21-2015 03:34 PM
(05-19-2015 03:52 AM)craigreilly Wrote: The 23P is 10/100 switch and the 23G is Gigabit.
Much of your other questions depend on the PBX you are using.
and what are the differences between T23 to T23P?
also,
is the T23 got FAILOVER MODE?