Yealink Forums
Accept SIP Trust Server Only - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Wishlist (/forumdisplay.php?fid=13)
+--- Thread: Accept SIP Trust Server Only (/showthread.php?tid=37219)



Accept SIP Trust Server Only - KNERD - 11-09-2016 05:25 PM

Can we get this set to ENABLED by default?

I am always getting complaints of mystery calls from customers/users.


RE: Accept SIP Trust Server Only - Travis_Yealink - 11-13-2016 08:45 AM

(11-09-2016 05:25 PM)KNERD Wrote:  Can we get this set to ENABLED by default?

I am always getting complaints of mystery calls from customers/users.

Hi,

I think it's easy for you to set it via web interface by yourself, right?
http://support.yealink.com/faq/faqInfo?id=181

We didn't set it as default, because this option has its own functionality, and our general firmware version release must evaluate the best option.
hope your understanding.


RE: Accept SIP Trust Server Only - KNERD - 11-21-2016 04:12 PM

Yes it is easy, but we are deploying many phones, and having to take the extra time to disabled this on every single phone we deploy.


RE: Accept SIP Trust Server Only - jolouis - 11-22-2016 02:47 PM

(11-21-2016 04:12 PM)KNERD Wrote:  Yes it is easy, but we are deploying many phones, and having to take the extra time to disabled this on every single phone we deploy.

That's what auto-provisioning is for. I really hope you since you are deploying many phones you are not configuring the account settings/etc all by hand every time! A basic auto provision setup, even without going through RPS, is quite straight forward to setup...


RE: Accept SIP Trust Server Only - Travis_Yealink - 11-22-2016 10:01 PM

(11-22-2016 02:47 PM)jolouis Wrote:  
(11-21-2016 04:12 PM)KNERD Wrote:  Yes it is easy, but we are deploying many phones, and having to take the extra time to disabled this on every single phone we deploy.

That's what auto-provisioning is for. I really hope you since you are deploying many phones you are not configuring the account settings/etc all by hand every time! A basic auto provision setup, even without going through RPS, is quite straight forward to setup...

Thanks Jolouis, yes, use the autoprovision to do the deployment would be much more convenient. For more information, pls refer below guide: http://download.support.yealink.com/download?path=upload%2Fattachment%2F2015-7-13%2F3%2Fd9edb38a-80c2-4649-ae20-8001126b8219%2FYealink_SIP-T2%20Series_T19%28P%29%20E2_T4%20Series_IP_Phones_Auto_Provisioning_Guide_V80_60​.pdf


RE: Accept SIP Trust Server Only - KNERD - 11-30-2016 09:14 PM

Thank, you. I will look into it.