+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T46G (/showthread.php?tid=3679)
T46G - remedy408 - 04-22-2015 05:05 AM
Hi,
I have a problem when my internet goes out and comes back on. The phones doesn't re-register with the network. I have to manually log into each phone and reactivate each line.
Is there an easier way to register each line without manually logging into each one?
In addition, i wait about 2 minutes for the time to expire but nothing happens.
Thank You.
RE: T46G - James_Yealink - 04-22-2015 05:13 AM
Hi,
If the network is not stable you can set the server expires to a short value then phone will detect the register status in short period.
The default value is 3600. Changing it to 60 will make phone detect the register status every 60 seconds.
The option is under Account-> Register
Regards,
James
RE: T46G - remedy408 - 04-22-2015 05:48 AM
Hi James,
Thanks for your response. Our internet some time goes out once a month. What would the recommend value to put?
RE: T46G - James_Yealink - 04-22-2015 06:07 AM
I think 360s is an accpetable value. Phone will automatically register in several minutes when network recover.
RE: T46G - remedy408 - 04-22-2015 06:10 AM
Thanks!