+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T46 / T41 provisioning bug V73 (/showthread.php?tid=3660)
T46 / T41 provisioning bug V73 - imfloridaguy - 04-17-2015 07:04 PM
We've identified a possible bug in V73 (running release 45) when auto provisioning phones.
We are peering two sip accounts to two different providers.
Account 1 is the main account. Account 2 is a 'back line' used only for dialing out in certain situations.
The issue lies in the button we assign for the 2nd account.
Here's the code:
linekey.15.line = 2
linekey.15.type = 15
linekey.15.value = 2
linekey.15.label = Back Line
No matter what we try, the phones provision with account 1 being the account used when pressing the 'Back Line' button. We have to manually go to each phone and change, via the keypad or the GUI. Once it's changed, it works fine.
So we SEND linekey.15.line = 2
The phone USES linekey.15.line = 1
I've verified this on a 12 phone deployment at least 20 times.
Thanks.
RE: T46 / T41 provisioning bug V73 - Flora_Yealink - 04-18-2015 06:52 AM
Thanks for your feedback, yes, you are right, we have fixed in the issue in the V80 Beta version , would you please use this version to test ?
28.80.0.20.rom
if it work well in your side as well, I will send the firmware of T41 to you .
Best Regards!
RE: T46 / T41 provisioning bug V73 - imfloridaguy - 04-26-2015 04:53 PM
Flora, Thank you. Is there a time when V80 will be officially released for all phones supporting it?
RE: T46 / T41 provisioning bug V73 - Flora_Yealink - 04-27-2015 10:00 PM
The V80 will be ready at the end of Q2 or early Q3 this year