Yealink Forums
T26P Cant upgrade firmware - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: T26P Cant upgrade firmware (/showthread.php?tid=3614)



T26P Cant upgrade firmware - craddys - 04-10-2015 12:04 AM

Hi all,

I have two T26P that have 6.2.0.54 firmware installed on them.

I have tried installing newer firmware onto the system to get it working with our 3CX system but everytime i start the upgrade i get the message:

talking, please update later...

I have rebooted and factory reset the phones with no luck. This is the first time we have had these phones so any help would be most apreciated!

Thanks


RE: T26P Cant upgrade firmware - Yealink_Peter - 04-10-2015 01:38 AM

Hi,

You should upgrade the frimware to V4X version firstly, then upgrade to V7x version.
Download from:
V4X: 6.43.0.7
V7X: 6.73.0.50

Thank you!
Regards,
Peter


RE: T26P Cant upgrade firmware - craddys - 04-10-2015 05:24 AM

(04-10-2015 01:38 AM)Yealink_Peter Wrote:  Hi,

You should upgrade the frimware to V4X version firstly, then upgrade to V7x version.
Download from:
V4X: 6.43.0.7
V7X: 6.73.0.50

Thank you!
Regards,
Peter

Thanks!!!
upgrading to 43 worked a charm.


RE: T26P Cant upgrade firmware - koolandrew - 09-03-2015 05:11 AM

(04-10-2015 05:24 AM)craddys Wrote:  
(04-10-2015 01:38 AM)Yealink_Peter Wrote:  Hi,

You should upgrade the frimware to V4X version firstly, then upgrade to V7x version.
Download from:
V4X: 6.43.0.7
V7X: 6.73.0.50

Thank you!
Regards,
Peter

Thanks!!!
upgrading to 43 worked a charm.

HI,

I have a version with the following:

Firmware Version 6.51.0.10
Hardware Version 4.0.0.4

I cannot change the firmware at all, and i tried your recommendation above.

Can you please suggest something.

Thanks


RE: T26P Cant upgrade firmware - koolandrew - 09-03-2015 10:34 PM

Yealink representative, can you please provide a suggestion for resolving this situation.

thanks