Time not setting - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: Dect Phone Series (/forumdisplay.php?fid=6) +--- Forum: W52P (Wireless) (/forumdisplay.php?fid=23) +--- Thread: Time not setting (/showthread.php?tid=3598) |
Time not setting - shawnmclain - 04-08-2015 07:43 AM I set the date and time on my W52p hit save and when I back out its still the same. Any one can help me out please. Shawn RE: Time not setting - Elaine_Yealink - 04-08-2015 03:01 PM (04-08-2015 07:43 AM)shawnmclain Wrote: I set the date and time on my W52p hit save and when I back out its still the same. Any one can help me out please. Dear Shawn, I think that is because the phone is configured to get time synchronizing from the time server. Please find the attached capture about the configuration page. If I disable the Time Synchronization, I can change time and date to anything I want. But if I enable it, no matter what I change to, the time and date will get synchronized. Please have a try and let me know the result. Regards Elaine RE: Time not setting - shawnmclain - 04-09-2015 12:40 AM (04-08-2015 03:01 PM)Yealink_Elaine Wrote:(04-08-2015 07:43 AM)shawnmclain Wrote: I set the date and time on my W52p hit save and when I back out its still the same. Any one can help me out please. I went in to all the phone settings and for some reason I can not find Time Synchronization and I did not see a attached capture with your post. Thanks so much RE: Time not setting - Elaine_Yealink - 04-09-2015 03:46 PM I went in to all the phone settings and for some reason I can not find Time Synchronization and I did not see a attached capture with your post. Thanks so much [/quote] HI Shawn, May I know what is the firmware version of your w52p? If it is not the latest one, would you please upgrade to the latest. Please note that if the current version is lower than V40(xx.40.xx.xx), please use the USB tool to do upgrade operation Base: http://www.yealink.com/Upload/W52P/V73/Firmware/26.73.0.11.zip Handset: http://www.yealink.com/Upload/W52P/V73/Firmware /26.73.0.11.zip About how to upgrade: http://www.yealink.com/Upload/W52P/2013124/Upgrading%20W52x%20Handset%20Firmware.zip Please have a try and let me know the result Regards Elaine RE: Time not setting - PhiDHome - 04-10-2015 06:04 PM Hi, I have the same issue. Handset Firmware and Base Station Firmware on latest versions. I have time server as cn.pool.ntp.org, timezone 'GMT' and DST as Automatic. Time is one hour behind. Thanks RE: Time not setting - Elaine_Yealink - 04-15-2015 11:13 PM Dears, I just had a test with Daylight Saving set to Automatically and found that there is one hour delay. I will have a check with RD for the reason and update to you. Before that, please manually change the value to enable as shown in the screenshot below. This method counts. Regards Elaine RE: Time not setting - Elaine_Yealink - 04-22-2015 03:21 PM Dears, Good news. This problem has been fixed by new firmware below. Please download and have a test. ftp://yealinkftp:yealinkftp@ftp.yealink.com/00.Firmwares/W52/25.73.0.30.rom Regards Elaine RE: Time not setting - virtualsupport - 09-23-2015 02:49 AM how can i get Username and password to download: ftp://yealinkftp:yealinkftp@ftp.yealink.com/00.Firmwares/W52/25.73.0.30.rom RE: Time not setting - CWR - 09-23-2015 12:22 PM the username / password is in the link. however, it may have expired by now. i'd expect any of the newer firmwares to have this fix. http://support.yealink.com/documentFront/forwardToDocumentDetailPage?documentId=25 RE: Time not setting - James_Yealink - 09-23-2015 12:25 PM Please upgrade base to latest firmware 25.73.0.40. http://support.yealink.com/attachmentDownload/download?path=upload%2Fattachment%2F2015-7-4%2F6%2F5cadf3c1-5e00-4c37-9a04-aaa6693b933e%2F25.73.0.40.zip |