+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T46G: Power LED always flashing when backlight is off (/showthread.php?tid=34805)
RE: T46G: Power LED always flashing when backlight is off - Werner1959 - 12-15-2016 06:46 PM
Even in the latest firmware T46-28.81.0.27.rom the bug is not fixed. But, I am not sure, if the 28.81.0.27 is an official main release of the firmware or not.
Meanwhile even visitors are asking for this flashing sh*t: "Oh, did you miss a call?"
I should laugh about, if it were not so annoying.This flashing for no reason is an absolutely NO GO!
RE: T46G: Power LED always flashing when backlight is off - darryl.grennan - 12-16-2016 12:29 AM
(12-15-2016 06:46 PM)Werner1959 Wrote: Even in the latest firmware T46-28.81.0.27.rom the bug is not fixed. But, I am not sure, if the 28.81.0.27 is an official main release of the firmware or not.
Meanwhile even visitors are asking for this flashing sh*t: "Oh, did you miss a call?"
This flashing for no reason is an absolutely NO GO!
I left the T48G a nasty review on Amazon about this problem. I think others should do the same. Hit Yealink in the pocket where it hurts.
-Darryl
RE: T46G: Power LED always flashing when backlight is off - darryl.grennan - 12-16-2016 03:58 AM
Is there an ETA as to when this firmware will be released?
This is frustrating.
-Darryl
RE: T46G: Power LED always flashing when backlight is off - Nasevorn - 12-19-2016 02:32 PM
(12-16-2016 03:58 AM)darryl.grennan Wrote: Is there an ETA as to when this firmware will be released?
This is frustrating.
-Darryl
New firmware release today but no fix for «Power LED missed Call bug» so far
:T46-28.81.0.25
Release Date: Dec 19th, 2016.
…
2. New Features
None
3. Optimization
1. Changed the value range of X in the configuration parameter linekey.X.line = that 0 cannot be available in version 81 or later:
X ranges from 1 to 29 (for SIP-T48G)
X ranges from 1 to 27 (for SIP-T46G/ T29G)
X ranges from 1 to 15 (for SIP-T42G/ T41P)
X ranges from 1 to 21 (for SIP-T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
2. Changed the supported file size of local log file into 256KB - 1024KB.
4. Bug Fixes
None
RE: T46G: Power LED always flashing when backlight is off - darryl.grennan - 12-19-2016 03:27 PM
(12-19-2016 02:32 PM)Nasevorn Wrote:(12-16-2016 03:58 AM)darryl.grennan Wrote: Is there an ETA as to when this firmware will be released?
This is frustrating.
-Darryl
New firmware release today but no fix for «Power LED missed Call bug» so far
T46-28.81.0.25
Release Date: Dec 19th, 2016.
…
2. New Features
None
3. Optimization
1. Changed the value range of X in the configuration parameter linekey.X.line = that 0 cannot be available in version 81 or later:
X ranges from 1 to 29 (for SIP-T48G)
X ranges from 1 to 27 (for SIP-T46G/ T29G)
X ranges from 1 to 15 (for SIP-T42G/ T41P)
X ranges from 1 to 21 (for SIP-T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
2. Changed the supported file size of local log file into 256KB - 1024KB.
4. Bug Fixes
None
I was disappointed as well.
-Darryl
RE: T46G: Power LED always flashing when backlight is off - Werner1959 - 12-20-2016 10:44 AM
I am not wondering about because (the higher version) *.27 also did not solve the issue.
But I did hope, the problem was solved before Christmas. Now, so I fear, it will not be so.
RE: T46G: Power LED always flashing when backlight is off - darryl.grennan - 12-20-2016 10:09 PM
(12-20-2016 10:44 AM)Werner1959 Wrote: I am not wondering about because (the higher version) *.27 also did not solve the issue.
But I did hope, the problem was solved before Christmas. Now, so I fear, it will not be so.
I just e-mailed the VP and CEO. This is ridiculous.
RE: T46G: Power LED always flashing when backlight is off - necits2015 - 12-28-2016 08:37 PM
This could easily be resolved with an entry under Features, Power LED. Create a Field called Power Saving Light Flash and allow the user to enable or disable it. Obviously with the number of posts and views on this topic users are not happy!!!
RE: T46G: Power LED always flashing when backlight is off - darryl.grennan - 01-08-2017 12:48 AM
Hi folks!
Checking back to see what progress has been made on this.
My understanding is that there will be a release to address this issue.
Can you please advise as to when this will be available?
The amount of frustration is rising and I'd really like Yealink to clean up this mess.
Regards,
Darryl
RE: T46G: Power LED always flashing when backlight is off - rdvoor - 01-11-2017 01:11 AM
add my frustration with the flashing power indicator LED. Upgraded to v81 firmware on a T46G to get the dial-pause enhanced DSS key feature, and got this "feature" along with it - ugh! Please update when this will be fixed.