Yealink Forums
EHS36 with Plantronics Savi - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Accessories (/forumdisplay.php?fid=28)
+--- Thread: EHS36 with Plantronics Savi (/showthread.php?tid=3449)



EHS36 with Plantronics Savi - Waztrix - 03-16-2015 10:39 PM

Hi Yealink

I'm using a Yealink T48G along with an EHS36 (3.16.0.0) and a Plantronics Savi W720 headset.

Approximately 80-90% of the calls I get everything is working perfectly.

My problem is that about 5-10% of the calls I get, when I try to answer them with the EHS function (by pressing button on headset) it just picks up the call and immediately hangs up. Sometimes it does this 3-4 times in less than a second (I hear the clicking sound 3-4 times).

This also happens if I press the "answer call" on my phone instead of clicking the headset - yet still only 5-10% of all calls.


RE: EHS36 with Plantronics Savi - Elaine_Yealink - 03-17-2015 02:05 AM

Dear,
Please plug in the 3.5mm DC Jack tightly. If still not work, please change a standard 3.5mm DC jack to have a try.


RE: EHS36 with Plantronics Savi - Johannes - 12-20-2016 04:13 PM

Hello -
I have the same configuration:

Yealink T48G 35.80.0.125
Plantronics Savi Office W720
EHS36
RJ cable from Phone to Headset

Pickup and Hangup are working perfectly well.

But there is no Audio?

Can you please help?

Thx Joe


RE: EHS36 with Plantronics Savi - Klaus_Yealink - 02-06-2017 03:08 AM

For the headset audio issue, I suggest do the below things:

1.upgrade to the latest version V81, and reset the phone.
2.refer to the below FAQ to connect the phone and headset, ensure connect correctly.
http://support.yealink.com/faq/faqInfo?id=117
3.if above steps can not help, please tell us how often does this issue happen, and help get the config.bin/level 6 log/PCAP file, then we will do a further analyze.
About how to get them, please see below link:
http://support.yealink.com/faq/faqInfo?id=311


RE: EHS36 with Plantronics Savi - Klaus_Yealink - 02-06-2017 03:09 AM

In addition, you can send the three files to support@yealink.com, then we will follow up.