T23G dialing out audio non existant - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: General topics (/forumdisplay.php?fid=15) +--- Thread: T23G dialing out audio non existant (/showthread.php?tid=3411) |
T23G dialing out audio non existant - Eugene007 - 03-09-2015 04:24 PM Hi All, Hope you can help I am not sure if I'm missing something in my config? Bought a brand new T23G, I can receive and call out, But when I dial out the phone rings and as soon as the receiving side answers the call the audio is non existant, I have to put the call on hold and then take it off of hold to hear anything. See pcap and config. RE: T23G dialing out audio non existant - James_Yealink - 03-09-2015 04:41 PM Hi, Please have a try of .20 firmware. ftp://yealinkftp:yealinkftp@ftp.yealink.com/firmware/T23/44.80.0.20.rom If the problem persist, do a facotry and check again. If the problem is still not resolved, please get pcap trace and confing.bin based on .20 firmware. Thanks, James RE: T23G dialing out audio non existant - Eugene007 - 03-09-2015 04:55 PM Thank you James, Firmware upgrade reolved the issue. RE: T23G dialing out audio non existant - saulgoodwin - 04-22-2015 09:43 PM Ah, brilliant. Thank you, that's very helpful. |