+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: Video Collaboration (/forumdisplay.php?fid=5)
+--- Forum: VP530 (/forumdisplay.php?fid=25)
+--- Thread: 802.1 x Mode Problem (/showthread.php?tid=3395)
802.1 x Mode Problem - Digicel AFG - 03-06-2015 03:45 AM
Hello,
We encounter a problem when configuring 802.1x on network advanced level.
On the IP Video phone VP500 the only 802.1x mode available is: EAP-MD5
This mode is unfortunately not compatible with your network.
In fact we use PEAP-MSCHAPv2 802.1x mode with CA certificates.
Failure to use this mode phones does not allow us to use on our network.
Is there a new frimware or new version of software that would allow us to solve this problem?
For the moment, we have :
- Frimware Version : 23.70.0.10
- Hardware Version : 23.5.1.201.18.0.8
Regards.
Digicel AFG
RE: 802.1 x Mode Problem - James_Yealink - 03-06-2015 09:30 AM
No, VP530 can only support EAP-MD5.
PEAP-MSCHAPv2 is supported in T4x series and Yealink next generation video phone(has not been released)
Regards,
James