+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: Call Completion is not always displayed (/showthread.php?tid=3389)
Call Completion is not always displayed - raphael - 03-05-2015 01:44 AM
Hi,
We have enabled "Call Completion" on all Customer T46G (60 Phones) Phones and at first everything is working as expected but after 2-3 days the request for call completion is not displayed anymore on the phone. Al phones have the V72 Firmware and we tried to upgrade 2 phones to the V73 Firmware but with the V73 Firmware the problem still exists.
The PBX is a FreeSWITCH 1.4.14. Please let me know if additional debug files are needed.
Thank you.
RE: Call Completion is not always displayed - James_Yealink - 03-05-2015 04:26 PM
Hi Raphael,
Do you mean that it stops working in all phones or part of these phones?
If the issue happens to all phones maybe there is something wrong in server.
If it just happens to several phones, plesae try resetting then re-configure it and check again.
Regards,
James
RE: Call Completion is not always displayed - raphael - 03-05-2015 09:26 PM
Hi James,
Disabling and reenabling don't make any difference on the T46G. The call completion is working again after a reboot. That phone has additional linekeys configured, can that make any difference?
The T41 is at the moment working fine, but that is a spare phone and is not used so much as the T46G.
Thank you
RE: Call Completion is not always displayed - Frank Drews - 04-20-2016 08:35 PM
Hi,
we experience a similar behaviour. Call completion stops working after some time. It is still working for some phones, but not for other, exspecially not for those, witch are used much. Rebooting the phone makes call_completion work again, so it's the phone, not the server (I am on 3cx)
T46 G 28.73.0.48
(03-05-2015 09:26 PM)raphael Wrote: Hi James,
Disabling and reenabling don't make any difference on the T46G. The call completion is working again after a reboot. That phone has additional linekeys configured, can that make any difference?
The T41 is at the moment working fine, but that is a spare phone and is not used so much as the T46G.
Thank you
RE: Call Completion is not always displayed - yozmag - 05-24-2016 09:43 PM
We have T23g and t46G with the last fw 8.0.95 on both call completion doesn't show.
RE: Call Completion is not always displayed - Frank Drews - 07-26-2016 02:18 PM
Update: Yealink has confirmed an issue with call completion stopping working after some time (after each call to an external line, which is busy). It will be fixed with the next firmware version. Thanks a lot to the great support by the Yealink Team especially Edward and Travis.
RE: Call Completion is not always displayed - Frank Drews - 08-10-2016 09:10 PM
Update:
The issue is fixed in the most current firmware (T46-28.80.0.136.rom).
This firmware is not official, but the official version will be available soon.
Thanks to the Yealink-Team
Thanks Travis