+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: protecting “on code” and “off code” from beeing changed by a user? (/showthread.php?tid=3387)
protecting “on code” and “off code” from beeing changed by a user? - mszag - 03-04-2015 11:47 PM
hello everybody,
i am looking for a way to protect specific settings, within the "CallFeatures"-menu.
Especially the "on code" and "off code" settings for call forwarding from beeing changed by a user.
I have set up following settings:
forward.always.on_code = *011
forward.always.off_code = *010
forward.busy.on_code = *021
forward.busy.off_code = *020
forward.always.on_code = *011
forward.always.off_code = *010
forward.no_answer.on_code = *031
forward.no_answer.off_code = *030
The user is able to change the values for these code, because it is editable from the phone menu itself.
Can i make these fields "protected" in some way or just "hide" it from the user, so that they are not able to changes its values?
Thanks for any advices!
RE: protecting “on code” and “off code” from beeing changed by a user? - Yealink_Peter - 03-07-2015 10:50 AM
(03-04-2015 11:47 PM)mszag Wrote: hello everybody,Hello,
i am looking for a way to protect specific settings, within the "CallFeatures"-menu.
Especially the "on code" and "off code" settings for call forwarding from beeing changed by a user.
I have set up following settings:
forward.always.on_code = *011
forward.always.off_code = *010
forward.busy.on_code = *021
forward.busy.off_code = *020
forward.always.on_code = *011
forward.always.off_code = *010
forward.no_answer.on_code = *031
forward.no_answer.off_code = *030
The user is able to change the values for these code, because it is editable from the phone menu itself.
Can i make these fields "protected" in some way or just "hide" it from the user, so that they are not able to changes its values?
Thanks for any advices!
Yes, you can edit the visable and writable permission for admin, var or user.
Please refer to below Guide to get the detailed information.
Yealink T4x IP Phones Configuration Guide for User Access Level V73_40
Yealink_T2x_IP_Phones_Configuration_Guide_for_User_Access_Level_V73_40
Thank you.
Regards,
Peter
RE: protecting “on code” and “off code” from beeing changed by a user? - mszag - 03-09-2015 06:39 PM
hello,
thank you for your answer and for pointing me to these documents!
I'll try to configure our phones, like it is explained in the guide!
Have a nice day!
Regards,
Markus