+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: Ringtone keep defaulting versus what we chose? (/showthread.php?tid=338)
Ringtone keep defaulting versus what we chose? - strobesnmore - 04-11-2013 08:32 PM
We are using the T28P and the ringtone keeps defaulting to a certain ring versus the one we set. Anyone experience this?
RE: Ringtone keep defaulting versus what we chose? - Bryan Nelson - 04-16-2013 07:58 AM
Yes, this was happening to us via auto-provisioning. There are 2 places to set the ringtone -- Under the phone menu, which seems to set the "Default" ringtone, and the Account settings for Line specific ringtones.
We were only setting the Phone default ringtone, and sometimes saw the phone set "Ring5.wav" as the account ringtone, rather than the "common" setting that uses the default. Not sure why, but it seems to happen on about 50% of brand new phones, despite identical model\version\provisioning config.
Hope this helps!
RE: Ringtone keep defaulting versus what we chose? - Yealink Support - 04-16-2013 04:39 PM
Hello,
Actually we have 6 kinds of ringtone, and the priority of these ringtone is like attached picture.
So please check whether you set the other ringtone which has higher priority.
RE: Ringtone keep defaulting versus what we chose? - Bryan Nelson - 04-16-2013 11:48 PM
Thanks for the clarification!
RE: Ringtone keep defaulting versus what we chose? - pjetson - 09-11-2014 01:59 PM
(04-16-2013 04:39 PM)Yealink Support Wrote: Hello,
Actually we have 6 kinds of ringtone, and the priority of these ringtone is like attached picture.
So please check whether you set the other ringtone which has higher priority.
Hi. This might seem like a silly question, but is 1 the highest priority, or is 6 the highest priority? I think 1 is the highest, but I'm not sure.
Thanks, Peter
RE: Ringtone keep defaulting versus what we chose? - Yealink_Jim - 09-12-2014 11:21 AM
Hi Pjetson,
1 the highest priority.
RE: Ringtone keep defaulting versus what we chose? - pjetson - 09-17-2014 02:09 PM
(09-12-2014 11:21 AM)Yealink_Jim Wrote: Hi Pjetson,Thanks for that. Unfortunately, it appears that with the 2.72.0.75, the various ringtone settings may be in different places.
1 the highest priority.
I can't seem to find the highest priority Emergency Ringtone setting at all.
The Contacts --> Local Directory --> Contacts ringtone setting and the Contacts --> Local Directory --> Group ringtone setting both seem to be on the Directory tab now, in the Local Directory section.
The Distinctive Ringtone setting seems to be on the Account tab, in the Advanced section now.
The other two settings on the picture are more difficult to match.
Is the Account --> Basic ring tone setting now on the Settings tab, in the Ring section?
Is the Phone --> Preference ring tone setting now on the Settings tab, in the Preference section?
The reason that I'm asking these questions is that I cannot seem to get the phones to have a different ringtone for internal and external calls, and I am thinking that it might have something to do with ringtone priorities.
I have created a contacts.xml file containing all my internal users. I have assigned all users in this file to a group called "internal".
For testing purposes, in the contacts.xml file, I have set the ringtone for the "internal" group to "Ring4.wav" and the ringtone for each individual user to "Ring2.wav".
I do not understand the Settings tab, in the Ring section, so I have left the Internal Ringer Text blank and the Internal Ringer File set to Ring1.wav for all ten settings.
On the Settings tab, in the Preferences section, I have set the Ring Type to Ring3.wav
According to ringtone priority, if I understand it correctly, a call from any internal user should sound the Ring2.wav ringtone, since an individual contact setting has the highest priority.
Calls from an external line will not match anything in the contacts.xml file, so will default to Ring3.wav
Do I understand this correctly? I am having trouble getting it to work - both internal and external calls sound the same ring tone.
RE: Ringtone keep defaulting versus what we chose? - pjetson - 09-19-2014 08:59 AM
While waiting for any suggestions, I noticed that I forgot to say which ring tone was sounding for all calls - it's Ring3.wav, which is supposed to be the lowest priority.
I should also point out that everything worked just fine for at least a year, and only stopped working when I upgraded to the latest firmware
Can anyone offer any help please?